Loyalty is Royalty. Free $200 AMEX Gift Card.

Class 1 Div 1 Explosion-Proof Edgelit Exit Sign Series: EEXP

Product Code: EEXP

Explosion-Proof Edgelit Exit Sign Featuring Class 1 Class 2 Div I II Group EFG Rating: Series: EEXP

  • Your Starting Price:
  • Shipping Weight: .lbs
  • Quantity in Cart: none

Product Code as Configured:

Price as
Configured

.01 USD 2020/01/01

Overview


Brief Description:

Features


Manufacturer:
Luxguild
Luxguild
Los Angeles California USA 844-394-8247
Product Code:

Illumination

  • Illumination is accomplished utilizing high-intensity, long-life LEDs exceeding UL 924 requirements for brightness and uniformity
  • LEDs provide excellent illumination while maximizing energy efficiency by consuming a maximum of only 3watts per fixture
  • LEDs are a maintenancefree solution, providing up to 100,000 hours of life.

Mounting

  • Standard ½” NPT Conduit hubs provided for alternate mounting options.

Housing

  • Constructed of copper-free cast aluminum alloy housing with an epoxy powder coat finish
  • The fixture housing is designed to contain an explosion if the hazardous vapors enter the enclosure and are ignited
  • The enclosure will cool and vent the product so that the atmosphere is not ignited.

Options

  • The Guardian circuit continuously monitors the operating condition of the battery charging circuit and battery supply voltage
  • The purpose of this option is to provide visual signaling in response to a fault at the EXIT sign battery and/or battery charger
  • If a failure is detected, visual status will occur immediately via the CHARGER LED and/or the BATTERY FAULT LED
  • The LEDs will stay illuminated until the fault is corrected.

Warranty

  • Any component that fails due to manufacturers defect is guaranteed for 5 years with a separate 5 year pro-rated warranty on the battery
  • The warranty does not cover physical damage, abuse or acts of God.

Listings

  • Class I Division 1, Groups C & D – Class II Division 1 & 2, Groups E, F & G – Class III – Class 1 Zone 1, Groups IIA and IIB - Zone 2, Groups IIA & IIB + H2 & IIC, IP65 and UL1598A Marine Outside Type.

Installation

  • Internally housed components and battery eliminate the risk of damage during installation.

Electrical

  • 120 or 277 volt, 60Hz standard input
  • 220 thru 240 volt, 50/60Hz (Option:240T)
  • Sealed Nickel Cadmium Battery – NiCad (With Battery Only)
  • batteries are maintenance-free with a life expectancy of 15 years
  • Temperature range from 0-40 degrees C
  • Operate for a minimum of 180 minutes during a loss of power with a 24 hour maximum recharge time for the battery
  • The brownout circuit monitors the flow of AC current to the unit and triggers the emergency lighting system once a set reduction of AC power occurs
  • Dip in the voltage will cause many fixtures to extinguish causing loss of normal lighting even though a total power failure has not occurred
  • When the battery’s terminal voltage falls below predetermined levels, the low-voltage circuit disconnects the emergency lighting load
  • The disconnect remains in effect until normal power is restored, preventing deep battery discharge and improving the life of the battery
  • The disconnect will also automatically reconnect the load circuit once the battery voltage returns to a normal value after charging
  • Easily located test button allows for manual verification of proper operation of the transfer circuit and emergency operation.

Mechanical


Applications


Optics


Construction


Intended Use


Specifications

Typical Installation Environment:
Damp Locations,Indoors,Industrial,Marine,Outdoors,Parking Garages,Parking Lots,Vandal-prone,Wet Location,
Rated Viewing Distance: (ft)
100
Input Voltage (AC)
120,220,240,277,120/277,
Remote Capable:
NA
Number of (Remote) Heads Supported:
0
Emergency Runtime: (min.)
180,
Emergency Circuit Modes:
AC-Only,Integrated Battery Backup,
Options
Buy American,NiCad Batteries,Self Diagnostic,
New York City Approved?:
NA
City of Los Angeles Approved?:
NA
City of Chicago Approved?:
NA
Installed Weight: (.lbs)
Master Case Quantity:
0
Master Case Width (.in):
0
Master Case Depth (.in):
0
Master Case Height (.in):
0
Body Materials:
Aluminum,
Unit Width (.in):
14.88
Unit Depth (.in):
3.69
Unit Height (.in):
16
Mounting Bracket Width (.in):
0
Mounting Bracket Depth (.in):
0
Mounting Bracket Height (.in):
0
Country of Origin:
USA
Battery Type:
Nickel–cadmium,
Battery Model:
Battery mAh:
0
Battery Cell Count:
0
Circuit Input (Hz):
60,50/60,
Wattage in Red LED:
0
Wattage in Green LED:
0
Wattage in White LED:
0
Wattage in Green LED @120v:
0
Wattage in Green LED @277v:
0
Wattage in Red LED @120v:
0
Wattage in Red LED @277v:
0
Wattage in White LED @120v:
0
Wattage in White LED @277v:
0
Input Amps for Green LEDs @ 120v (A):
0
Input Amps for Green LEDs @ 277v (A):
0
Input Amps for Red LEDs @ 120v (A):
0
Input Amps for Red LEDs @ 277v (A):
0
Input Amps for White LEDs @ 120v (A):
0
Input Amps for White LEDs @ 277v (A):
0
Available Face Count:
Single,Double,
Available Arrow Configurations:
Available Housing Colors:
Gray,
Available Face Colors:
White,
Available Framing/Trim Colors:
NA,
Available Illumination Colors:
Green,Red,
Illumination Lamp Type:
LED,
Max. Operation Temperature (C):
40
Max. Operation Temperature (F):
104
Min. Operation Temperature (C):
0
Min. Operation Temperature (F):
32
Hazardous Zone Protection Rating:
Hazardous Class Rating:
Hazardous Division Rating:
Hazardous Group Rating:
Hazardous Zone Rating:
Hazardous Area Temperature Code:
Certifications & Compliance:
UL US,

Related Articles

Files

...

Printable Catalog Sheets

Get The Specification Sheet.

Dimensions

Dimensions (inches) Boxed Weight Shipping Volume (Boxed Fixtures) A B C 14.88 16.00 3.69 14 lbs. 1.24 cu. ft. B A C

Price List