High Impact Enclosure Power Unit Emergency Light Series : ELKS

Product Code: ELKS

High Impact Enclosure Power Unit Emergency Light Series : ELKS

ELKS USD 258.00 2024/01/01
  • Your Starting Price:
  • Shipping Weight: .lbs
  • Quantity in Cart: none

Product Code as Configured:

Price as Configured

Overview


Brief Description:
Manufacturer:
Luxguild
Luxguild
Los Angeles California USA 844-394-8247
Product Code:
ELKS

Features

Illumination

  • Each unit comes with two (2) 9W high intensity incandescent lamps (standard).

Mounting

Housing

Options

Warranty

  • 3-year full warranty, excluding lamps and fuses.

Listings

  • UL Listed
  • Complies with NEC, Life Safety Code and OSHA.

Installation

Electrical

  • Power Requirements: 120/277 Vac, 60 Hz., 0.3/0.15 A (other inputs available)
  • Output: 6, 12 or 24 volt fused output circuit
  • Transfer: Dusttight relay automatically and instantly energizes lamp load upon failure of AC supply
  • LVD: Low voltage battery disconnect circuit automatically shuts down lamp load and circuitry when battery reaches 87-1/2% of its nominal voltage, preventing deep discharge and permanent damage to the battery
  • Lockout: Labor saving electronic circuit automatically connects battery when the AC circuit is activated
  • Brownout: Close tolerance electronic circuit activates emergency unit when utility power dips below 80-85% of nominal voltage
  • Emergency Heads: The unit is furnished with two EF11 weather resistant lighting heads
  • Heads are constructed of impact resistant, flame retardant, thermoplastic and have 9 watt high intensity incandescent lamps
  • Charger: The charger utilizes an integrated circuit which samples the batter y in relation to its temperature, state of charge and input voltage fluctuations
  • The charger is two-rate, temperature compensated, short-circuit protected and reverse polarity protected
  • The equipment is capable of full recharge in compliance with UL924 specifications
  • Transformer: 120/277 Vac input
  • Controls: Sealed push-to-test switch and diagnostic indicator lights for AC-on and pulse charge.

Mechanical

Applications

Optics

Construction

Intended Use

Specifications

Input Voltage (AC)

120,277,120/277,

Remote Capable:

No

Number of (Remote) Heads Supported:

3

Emergency Runtime: (min.)

90,

Options

Ammeter,Time Delay,Voltmeter,Wireless Communication,

New York City Approved?:

NA

City of Chicago Approved?:

NA

Installed Weight: (.lbs)

Master Case Quantity:

0

Master Case Width (.in):

0

Master Case Depth (.in):

0

Master Case Height (.in):

0

Body Materials:

Stainless Steel,

Unit Width (.in):

11.625

Unit Depth (.in):

5

Unit Height (.in):

13

Country of Origin:

China,

Battery Type:

Lead-Calcium,Nickel–cadmium,

Battery Model:

Battery mAh:

0

Battery Cell Count:

0

Circuit Input (Hz):

60,

Available Housing Colors:

Illumination Lamp Type:

LED,Incandescent,Halogen,

Max. Operation Temperature (C):

0

Max. Operation Temperature (F):

0

Min. Operation Temperature (C):

0

Min. Operation Temperature (F):

0

Certifications/Compliance:

Related Articles

Files

...

Printable Catalog Sheets

Get The Specification Sheet.

...

Installation Sheets

Get The Installation Sheet

...

Photometric Data

Get The IES Files


Dimensions

15-1/2” 21-3/4” 6-1/4” 18-5/8” 17-1/2” 21-1/18” “L” Enclosure shown with EF39 11-7/8” 8” 5” 11-5/8” 12-7/8” 13” “S” Enclosure shown with EF25

Price List