Wet Location Semi-Recessed MR-16 Emergency Light Series : ELMR16WP

Product Code: ELMR16WP

Clear housing design looks great

ELMR16WP USD 75.00 2024/01/01
  • Your Starting Price:
  • Shipping Weight: .lbs
  • Quantity in Cart: none

Product Code as Configured:

Price as Configured

Overview

ELMR16WP Wet and Cold Location Emergency Light

Wet Location and Cold Weather Rated Emergency Light with Halogen or LED Lamps

Brief Description:
Wet Location and Cold Location Rated. Suitable for Indoor or Outdoor Installation, the ELMR16WP Emergency Light is available in 7W MR16 Halogen Lamps, optional 3.3W white MR16 LED Lamps or Premium, 5W white MR16 LED Lamps. With its fully gasketed clear polycarbonate cover and high-impact resistant, thermoplastic housing with an optional internal heater and even a battery blanket for those ultra cold locations, the ELMR16WP is an economical, super-tough emergency lighting solution from Luxguild that will meet all of your cold-weather and wet location needs.
Manufacturer:
Luxguild
Luxguild
Los Angeles California USA 844-394-8247
Product Code:
ELMR16WP

Features

  • Extended Temperature Ratings via Cold Weather Options.
  • Extended Runtimes via 3.3W MR16 LED Lamps or 5W MR16 LED Lamps.
  • LED or Halogen MR16 Lamps.
  • Indoor or Outdoor Rated.
  • Wet and Cold Location Rated.

Illumination

  • Two fully adjustable, ultra-bright, round, 7.5 watt MR16 halogen lamp heads with a fully gasketed enclosure and clear polycarbonate lens cover.
  • Optional: 3.3W high performance MR16 base LED lamps or 5.0W high performance MR16 base LED lamps.

Mounting

  • Wall mount via knockouts on the back of the housing.
  • Ceiling mount via knockouts on the top of the housing.
  • Suitable for junction box mounting, includes the kit and screws.

Housing

  • Injection-molded, engineering-grade, 5VA flame retardant, high-impact resistant, thermoplastic in neutral gray or black finish.
  • Fully-gasketed clear polycarbonate cover offers protection against wet, non-hazardous dust, corrosive atmospheres and to water spray or splashing water locations.

Options

  • HTR: Optional Internal Heater for cold temperature applications (-9C to 50C or 16F to 122F).
  • CWHTR: Optional Internal Heater plus Battery Blanket for extreme cold temp applications (-25C to 50C Halogen or -25C to 40C LED).
  • USA: Substantial transformation assembly in the U.S. complies with “AssembLED in the USA” under the Buy American Act.
  • LED: 3.3W White LED MR16s, 1/side.
  • PLED: Premium, 5W White LED MR16s, 1/side.
  • CEC: Certifed to CEC under Title 20 regulations.

Warranty

  • Five year warranty on all electronics and housing.
  • Battery pro-rated for two years.

Listings

  • Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.
  • UL listed for wet locations. (20°C – 40°C).

Installation

  • Surface mount via easy connect back plate, which fits most standard junction boxes and snaps into place making internal electrical connections.
  • Conduit mount knockout on top of housing and back plate.
  • Suitable for wall mount.
  • 3 wires to connect (Hot, Neutral, Ground) using the provided wire connectors.

Electrical

  • Dual 120/277 voltage.
  • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
  • LVD (low voltage disconnect) prevents battery from deep discharge.
  • 6V maintenance-free, rechargeable Sealed lead acid battery.
  • Internal solid-state transfer switch automatically connects the internal battery to lamp heads for minimum 90-minute emergency illumination.
  • Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.

Mechanical

  • Push To Test button.
  • Adjustable Heads.

Applications

  • Indoors or Outdoors in cold or wet locations (20C - 40C).
  • Optional: Internal Heater for temps -9C -> 40C or Internal Heater + Battery Blanket for temps -25C -> 50C (MR16 Halogen) and -25C -> 40C (LED). 

Optics

  • Two adjustable 12w Halogen MR16 heads or two 3.3w LED MR16 lamps.
  • If you select the LED lamps, the runtime is extended due to using less wattage.

Construction

  • Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in gray or black finish.
  • Fully gasketed clear polycarbonate cover offers protection against wet, non-hazardous dust, corrosive atmospheres and to water spray or splashing water locations.

Intended Use

  • Indoors or Outdoors in cold or wet locations (20C - 40C).
  • Optional: Internal Heater for temps -9C -> 40C or Internal Heater + Battery Blanket for temps -25C -> 50C (MR16 Halogen) and -25C -> 40C (LED). 

Specifications

Input Voltage (AC)

120,277,120/277

Remote Capable:

No

Number of (Remote) Heads Supported:

2

Emergency Runtime: (min.)

90

Options

Battery Heater,Recessed Heads

New York City Approved?:

NA

City of Chicago Approved?:

NA

Installed Weight: (.lbs)

Master Case Quantity:

0

Master Case Width (.in):

0

Master Case Depth (.in):

0

Master Case Height (.in):

0

Body Materials:

Thermoplastic,Polycarbonate

Unit Width (.in):

14.8125

Unit Depth (.in):

4.25

Unit Height (.in):

5.625

Country of Origin:

USA,China

Battery Type:

Battery Model:

6v4.5Ah SLA

Battery mAh:

4500

Battery Cell Count:

1

Circuit Input (Hz):

60

Available Housing Colors:

Black,Gray

Illumination Lamp Type:

LED,Halogen

Max. Operation Temperature (C):

50

Max. Operation Temperature (F):

122

Min. Operation Temperature (C):

-25

Min. Operation Temperature (F):

-13

Certifications/Compliance:

NFPA-101,UL 924,UL 1994,ULus

Related Articles

Files

...

Printable Catalog Sheets

Get The Specification Sheet.

...

Installation Sheets

Get The Installation Sheet

...

Photometric Data

Get The IES Files


Dimensions

5 5/8 4 1/4 14 13/16

Price List